Using Brass Hoses to Create Wind Chimes

Brass hoses has various applications. It is popularly used in industrial applications as well as in constructing homes and buildings. Pneumatic tube But other than these, the material can also be used to create wind chimes for your home.

A wind chime is a form of musical instrument that normally adorns many homes. It is hang outside permit it to create music that’s pleasing to the ears every time the wind blows across it. When brass hoses is used to make this, you can be sure to enjoy gentle music in your own home. Unaware to many of you, this is the same material used in making some of the famous wind musical instruments especially those used in orchestras such as the trumpet, saxophone, trombone, flute etcetera.

But unlike the real musical instruments, creating a wind chime is very easy to do. All you need are four to eight small brass hoses with a one-eighth thickness which you can obtain from hardware stores or you can order easily online. You can freely choose the shape and thickness of the material depending on the type of sound you’d like to achieve. Keep in mind that the thicker the tube, the less sound it produces and the longer the tube, the deeper the sound it gives off.

The first step is to create a circular wooden top where you will hang the pontoons. The diameter will depend on the number of hoses you want to use. There also has to be a clapper that will do the job of striking the brass pontoons. Next is to prepare a thick nylon place for hanging the pontoons. Get a prop hook as well for securing your wind chime to a roof overhang.

During this period, you can start cutting your brass hoses with the use of a hacksaw. Make sure, though, that you have marked the areas where you’re going to cut. Create different program plans to produce varying sounds and attach them to the wooden top in ascending order. However if you want, you can always use pontoons with just one length.

Before putting the nylon place, exciting that you sand the edges of the hoses first. This will avoid getting of the place every time they move with the wind. From there, you can routine two small holes facing each other on the most suitable the main tube. Routine holes as well to the wooden top about an inch apart. Then you can already insert the nylon place first into the brass hoses and then attach it to the wooden top.

The last step is to gather all the nylon strings to manufacture a triangular shape at the very top and then attach them to the prop hook. Just make sure you tie them safely to the hook so that even though the wind is a bit strong, the wind chime stays in place. This can be a great try it for yourself project you can do at home with your children. It’s not even a costly thing to do but the one which can give you enjoyment.

Leave a Reply

Your email address will not be published. Required fields are marked *